Browse within the largest BIM library and enrich your project with manufacturer-specific and generic BIM content! The powerful search engine allows you to find up-to-date graphic and parametric product information, ready to use in your BIM process. Simply load or insert 3D content directly into your Revit model or CAD drawing. Without having to leave your project environment. Free to download and use. You can download the app for free from [a href="https://store.mepcontent.com/en/product/details/2" target="_blank"]our store[/a].

Air conditioner - Single split outdoor unit Outdoor unit must be combined with indoor unit VAIP1-...WNI with the same cooling capacity.

Air conditioner - indoor unit Indoor unit must be combined with outdoor unit VAIP1-...WNO with the same cooling capacity.

One way cassette fan coil unit via Carisma Whisper

VRF Multi-position air handler unit

VRF Multi-position air handler unit

Water source VRF heat recovery

VRF 1-way cassette

Water source VRF heat recovery

ECOFAN with thermostat and switch

The ProFill range consists of 2 refill products for commercial systems of different sizes. These products are not permanently fitted to the system. They are used to fill the system and then removed. To top up the water in the system (refill/top up), you should use one of the permanently installed filling products (SpiroPure Home / Pro). There are two sizes for the SpiroPure ProFill (Mobile Filling) (9.5 and 23.0 liter tank).

The ProClean range consists of 2 treatment and cleaning products for commercial systems of different sizes. The mobile products can be used for conditioning and cleaning in the by-pass. They are temporarily installed in an existing system where they can remove impurities from the system and treat the water to the desired level.

The Pro range consists of 2 permanently installed refill products for commercial systems of different sizes. They can be used to fill the system and to refill water losses from the system (top up/refill). They have an LED conductivity indicator and a Fill Combi (backflow preventer, pressure reducer and pressure gauge) as standard. There are two sizes (9.5 and 23.0 liter bottle) for the SpiroPure Pro (fixed filling).

The Pro GLT range consists of 2 permanently installed refill products for commercial systems of different sizes. They can be used to fill the system and to refill water losses from the system (top up/ refill). They have an LED conductivity indicator and a FillCombi (backflow preventer, pressure reducer and pressure gauge) as standard. There are two sizes (9.5 and 23.0 liter bottle) for the SpiroPure Pro (fixed filling).

The Home range consists of 3 refill systems for domestic installations of different sizes. Once installed (including wall bracket), the system ensures a constant supply of refill water and consistent water quality in the heating system. The integrated resin cartridge contains the demineralizing resin, which changes colour to indicate that the cartridge needs to be replaced. The products can be sold with (Home+) or without (Home) a filling combination valve (backflow preventer, pressure reducer and pressure gauge).

The Home range consists of 3 refill systems for domestic installations of different sizes. Once installed (including wall bracket), the system ensures a constant supply of refill water and consistent water quality in the heating system. The integrated resin cartridge contains the demineralizing resin, which changes colour to indicate that the cartridge needs to be replaced. The products can be sold with (Home+) or without (Home) a filling combination valve (backflow preventer, pressure reducer and pressure gauge).

The Home range consists of 3 refill systems for domestic installations of different sizes. Once installed (including wall bracket), the system ensures a constant supply of refill water and consistent water quality in the heating system. The integrated resin cartridge contains the demineralizing resin, which changes colour to indicate that the cartridge needs to be replaced. The products can be sold with (Home+) or without (Home) a filling combination valve (backflow preventer, pressure reducer and pressure gauge).

Single crossover

F/female thread elbow with wallplate

F/female thread elbow with wallplate

F/F/F/F offset cross

Double crossover

Air conditioner ceiling suspended, with refrigerant type R32

Sensor and alarm kit

Air conditioner wall mounted, with refrigerant type R32

Air conditioner ceiling concealed, with refrigerant type R32

Branch box

Standard Wired Remote Controller

4-way flow ceiling cassette indoor unit, with refrigerant type R32

FULL INVERTER air conditioners ideal for metrological rooms and laboratories, with refrigerant type R410A

Hermetic BLDC inverter compressor, with refrigerant type R410A

FULL INVERTER air conditioners ideal for metrological rooms and laboratories, with refrigerant type R410A

Cellular device

RAUPIANO - Other components

RAUPIANO - Couplings

RAUPIANO - Reducers

RAUPIANO - Branches

RAUPIANO - Endcaps

RAUPIANO - Elbows

RAUPIANO - Pipes

Monobloc air-water inverter heat pump (R290)

Monobloc air-water inverter heat pump (R290)

Circular single/double wall system powered CAV regulator

RAUTITAN PX - Couplings

RAUTITAN PX - Reducers

RAUTITAN PX - Elbows

RAUTITAN PX - Tees

RAUTHERM S

RAUTITAN RX+ - Endcaps

RAUTITAN RX+ - Wall plates

RAUTITAN RX+ - Manifolds

RAUTITAN RX+ - Transitions

RAUTITAN RX+ - Tees

RAUTITAN RX+ - Reducers

RAUTITAN RX+ - Couplings

RAUTITAN RX+ - Elbows

System overlapping components

System overlapping components - Pipes

Fully-configurable and high-efficiency air-source reverse-cycle rooftop unit

Fully-configurable and high-efficiency air-source cooling only rooftop unit

Fully-configurable and high-efficiency air-source cooling only rooftop unit

Fully-configurable and high-efficiency air-source reverse-cycle rooftop unit

Filter of chloramines in swimming pool water

Mechanical filtration intended for use in public swimming pools

Prefilters made of injected PVC with stainless steel basket and stainless steel screws

Pre-filtration by screening intended for swimming pool use

Filter of chloramines in swimming pool water

Mechanical filtration intended for use in public swimming pools

Pump for residential swimming pool

Plant support plinth

Reversible unit, air source for outdoor installation, with refrigerant type R454B

Water-powered air heater

High efficiency chiller, air source for outdoor installation, with refrigerant HFO-1234ze

Air-Water Heat Pump

Air-Water Heat Pump

Heat pump indoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Henco Sprinkler Press PKS - Tee

Henco Sprinkler Press PKS - Transitions

Henco Sprinkler Press PKS - Couplings

Henco Sprinkler Press PKS - Elbows

T-female with plug for test pressure 13PKS-OP-CS (CW724)

Henco Pro Sprinkler - Elbows

Henco Pro Sprinkler - Transitions

Refrigerant leak detector kit for R32 KX - A device that detects refrigerant when R32 refrigerant has leaked in the room - Wide flexibility of installation for safety measures which is necessary in standard IEC60335-2-40 (Ed.6) for R32 use system. - Easy installation - Optional safety alarm / Optional shut-off valve kit / Mechanical ventilation (third-party) can be activated by leak detector

Henco System overlapping components - Pipes

Henco System overlapping components - Transitions

Hydrolution - All-in-one floor standing indoor unit (R410A) - Easy installation and operation - Flexible all in one indoor module for heating, cooling and hot water - Ideal solution to upgrade existing heating systems or new builds with requirements for high hot water performance - Equipped with a capacity of 180 litres of heated domestic water heater - Integrates an electrical heater for backup operation - Ready for an extra additional heat connection (eg: gas boiler, oil boiler). - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with Main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution - All-in-one floor standing indoor unit (R32) - Easy installation and operation - Flexible all in one indoor module for heating, cooling and hot water - Ideal solution to upgrade existing heating systems or new builds with requirements for high hot water performance - Equipped with a capacity of 180 litres of heated domestic water heater - Integrates an electrical heater for backup operation - Ready for an extra additional heat connection (eg: gas boiler, oil boiler). - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with Main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution - Wall mountable indoor unit (R32/R410A) Hydrobox - Compact and plug and play unit - Size similar to a gas boiler - Split connection (refrigerant pipes required between outdoor and indoor unit ) - Ready for heating, cooling and hot water production (separate tank required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution - Wall mountable indoor unit (R410A) Hydrobox - Compact and plug and play unit - Size similar to a gas boiler - Split connection (refrigerant pipes required between outdoor and indoor unit ) - Ready for heating, cooling and hot water production (separate tank required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution EZY - Heat pump standard inverter outdoor unit (R32) - Monobloc Air to Water Heat Pump - Suitable for domestic applications - Ready for heating, cooling and hot water production (separate tank required) - Environmentally friendly with a LOT1 energy class of A+++ - Possible to connect system in cascade with up to 8 outdoor units (Accessory required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready)

Henco Press super size - Tee

Henco Press super size - End caps

Henco Press super size - Couplings