myVAILLANT connect - Gatway

Air conditioner - Single split outdoor unit Outdoor unit must be combined with indoor unit VAIP1-...WNI with the same cooling capacity.

Air conditioner - indoor unit Indoor unit must be combined with outdoor unit VAIP1-...WNO with the same cooling capacity.

VRF Multi-position air handler unit

VRF Multi-position air handler unit

Water source VRF heat recovery

VRF 1-way cassette

Water source VRF heat recovery

Air conditioner ceiling suspended, with refrigerant type R32

Sensor and alarm kit

Air conditioner wall mounted, with refrigerant type R32

Air conditioner ceiling concealed, with refrigerant type R32

Branch box

Standard Wired Remote Controller

4-way flow ceiling cassette indoor unit, with refrigerant type R32

FULL INVERTER air conditioners ideal for metrological rooms and laboratories, with refrigerant type R410A

Hermetic BLDC inverter compressor, with refrigerant type R410A

FULL INVERTER air conditioners ideal for metrological rooms and laboratories, with refrigerant type R410A

Cellular device

Monobloc air-water inverter heat pump (R290)

Monobloc air-water inverter heat pump (R290)

RAUTITAN RX+ - Manifolds

Reversible unit, air source for outdoor installation, with refrigerant type R454B

Water-powered air heater

Air-Water Heat Pump

Air-Water Heat Pump

Heat pump indoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Refrigerant leak detector kit for R32 KX - A device that detects refrigerant when R32 refrigerant has leaked in the room - Wide flexibility of installation for safety measures which is necessary in standard IEC60335-2-40 (Ed.6) for R32 use system. - Easy installation - Optional safety alarm / Optional shut-off valve kit / Mechanical ventilation (third-party) can be activated by leak detector

Hydrolution - All-in-one floor standing indoor unit (R410A) - Easy installation and operation - Flexible all in one indoor module for heating, cooling and hot water - Ideal solution to upgrade existing heating systems or new builds with requirements for high hot water performance - Equipped with a capacity of 180 litres of heated domestic water heater - Integrates an electrical heater for backup operation - Ready for an extra additional heat connection (eg: gas boiler, oil boiler). - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with Main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution - All-in-one floor standing indoor unit (R32) - Easy installation and operation - Flexible all in one indoor module for heating, cooling and hot water - Ideal solution to upgrade existing heating systems or new builds with requirements for high hot water performance - Equipped with a capacity of 180 litres of heated domestic water heater - Integrates an electrical heater for backup operation - Ready for an extra additional heat connection (eg: gas boiler, oil boiler). - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with Main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution - Wall mountable indoor unit (R32/R410A) Hydrobox - Compact and plug and play unit - Size similar to a gas boiler - Split connection (refrigerant pipes required between outdoor and indoor unit ) - Ready for heating, cooling and hot water production (separate tank required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution - Wall mountable indoor unit (R410A) Hydrobox - Compact and plug and play unit - Size similar to a gas boiler - Split connection (refrigerant pipes required between outdoor and indoor unit ) - Ready for heating, cooling and hot water production (separate tank required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready) - Equipped with main hydraulic components & integrated remote controller - Universal power supply (3 phase 400V / 1 phase 230V )

Hydrolution EZY - Heat pump standard inverter outdoor unit (R32) - Monobloc Air to Water Heat Pump - Suitable for domestic applications - Ready for heating, cooling and hot water production (separate tank required) - Environmentally friendly with a LOT1 energy class of A+++ - Possible to connect system in cascade with up to 8 outdoor units (Accessory required) - Connectable to an external monitoring system - MODBUS (Accessory required) - Connectable to its own remote monitoring system via myUplink platform - Possibility to combine with PV (photovoltaic) solar panels (Accessory required) - Possibililty of integration with pools (pool heating) and solar heating (Accessory required) - Smart Grid Ready (SG Ready)

Water-powered air heater

Water-powered air heater

Water-powered air heater

Reversible unit, air source for outdoor installation, with refrigerant type R454B

Remote Controller - Wired Remote Controller with Easy touch and Easy view with full dot Liquid Crystal display - LCD panel with light tap operation - Simple interface with only three buttons - Multi language display (12 languages) - New function for KXZ3 and safety equipment - Setting for KXZ3 energy saving function - Control for Thermal sensor kit (option for designated model only)

Wall mounted Standard Series - Indoor Unit - Elegant design that fits into any kind of interior decoration - Long reach airflow is obtained using Jet Air technology (same technology as blade shape of jet engine) - Flap control system: air flaps can be adjusted in a wide angle range to provide a comfortable air flow - Cleaning and maintenance are easier than ever thanks to the removable cover - Two available ranges compatible with R32 (-W1) or R410A (-S) and single / multi systems

18 - 265 kW Reversible unit, air source for indoor installation with refrigerant type R410A

VRF ducted low/middle static pressure - Indoor unit (R32) - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 100 Pa - Installation flexibility as thin design with 280mm height - Standard built- in drain pump - Transparent access hole to drain pan to check the drain pan without removing drain pan - Reduced energy consumption by applying DC fan motor

VRF ducted high static pressure - Indoor unit (R32) - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 200 Pa - Standard built- in drain pump - Transparent access hole to drain pan to check the drain pan without removing drain pan - Reduced energy consumption by applying DC fan motor

VRF Duct Connected-Compact & Flexible - Indoor Unit (R32) - Compact ducted unit with slim design (257mm height & 570 mm Width). - The best solution for air conditioning in hotels with compact and thin size units - Interchangeable return air inlet (bottom or front) - Low sound level: the low sound level can ensure comfortable stay and rest in hotels. - Drain pump optional.

VRF ceiling cassette -4way- Indoor unit (R32) - Draft Prevention Panel as an option - Individual flap control system - Drain can be discharged upwards by 850mm from the ceiling surface. - Motion Sensor to improve the comfort and energy saving performance of the unit. - Component design can achieve better aerodynamic performance and lower noise level

Safety shut-off valve kit for R32 KX - A device that blocks the flow of refrigerant to the location where the leakage is occurring - Wide flexibility of installation for safety measures which is necessary in standard IEC60335-2-40 (Ed.6) for R32 use system. - Easy installation

- Standard R32 VRF module (FDC-KXZVE3) with a cooling range from 44.8 kW to 67.0 kW - 2 outdoor units combination - Wide design flexibility thanks to external static pressure of 90Pa - Wider limitation of piping installation - Flexible selection of safety measures - Wide range of operation down to -25ºC in heating and up to +52ºC in cooling - Connected capacity up to 150% and large number of connected indoor units (up to 67 for large sizes) - Wide range of controls, central controls and BMS systems are available

- Standard R32 VRF module (FDC-KXZVE3) with a cooling range from 72.8 kW to 100.5 kW - 3 outdoor units combination - Wide design flexibility thanks to external static pressure of 90Pa - Wider limitation of piping installation - Flexible selection of safety measures - Wide range of operation down to -25ºC in heating and up to +52ºC in cooling - Connected capacity up to 150% and large number of connected indoor units (up to 80 for large sizes) - Wide range of controls, central controls and BMS systems are available

VRF Ceiling Cassette -1way- indoor unit (R32) - Individual flap control system - Compact design - Drain can be discharged upward by 600mm - Wireless remote control is an option

VRF Ceiling cassette -1way Compact - Indoor Unit (R32) - Compact design for Comfortable effective cooling for small rooms. - Ultra slim design at just 250mm above the ceiling. - Standard built- in drain pump. - Fit in to Standard 600 x 600 ceiling panel.

- Standard R32 VRF module (FDC-KXZE3) with a cooling range from 22.4 kW to 33.5 kW - Single Module - Wide design flexibility thanks to external static pressure of 90Pa - Wider limitation of piping installation - Flexible selection of safety measures - Wide range of operation down to -25ºC in heating and up to +52ºC in cooling - Connected capacity up to 150% and large number of connected indoor units (up to 33 for large sizes) - Wide range of controls, central controls and BMS systems are available

Reversible heat pump, water source with refrigerant type R410A

Water to water heat pump, reversible on hydraulic side with refrigerant type R410A

Design Remote Controller

Stainless Steel Premium Open LT W320 Manifold

Composite Premium Open LT W500 Manifold

Composite Premium Open LT U500 Manifold

Composite Premium Pro District 926 Manifold

Stainless Steel Premium Open LT U320 Manifold

Composite Premium Pro W510 Manifold

Composite Premium Pro Separated 926 Manifold

2-12 way - Composite district heating manifold

2-16 way - Composite manifold with pump

1-12 way - SLIM district heating manifold Grundfos-2 standard

1-16 way - SLIM manifolds with Grundfos/Wilo A-label

2-16 way - Composite open manifold

2-13 way - Stainless steel open manifold

2-13 way - Stainless steel open premium manifold

FULL INVERTER split-system air conditioners for IT Cooling

Air conditioners for IT Cooling for chilled water feeding

Air conditioners for IT Cooling for chilled water feeding

Air conditioners for IT Cooling for chilled water feeding

Air conditioners for IT Cooling for chilled water feeding

Air conditioners for IT Cooling for chilled water feeding

FULL INVERTER split-system air conditioners for IT Cooling

Air conditioners for IT Cooling for chilled water feeding

FULL INVERTER split-system air conditioners for IT Cooling

Air cooled condensers for IT Cooling with axial fans

Air cooled condensers for IT Cooling with axial fans

Air cooled condensers for IT Cooling with axial fans

Air cooled condensers for IT Cooling with axial fans

Mixing Shunt LTV

Air cooled condensers for IT Cooling with axial fans

Air cooled condensers for IT Cooling with axial fans

Front Steel Manifold

Air cooled condensers for IT Cooling with axial fans

Air cooled condensers for IT Cooling with axial fans

Basic Steel Manifold

Air cooled condensers for IT Cooling with axial fans

Air cooled condensers for IT Cooling with axial fans

Floor standing - Indoor unit - Comfortable air flow distribution by providing a wide and powerful air flow - Transport and installation are facilitated thanks to a slim design (min. depth: 329 mm) - More efficient installation by providing 4 possible configurations of refrigerant and drain piping - Easy maintenance by providing quick access to components by only removing the front panel - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Remote control will integrate built-in R32 leak detector functions: Audible and visible alarm (VH series only) - Product range available with R32 (VH) and R410A (VD) refrigerants

RAC Single system - Outdoor Unit - Connectable with wall mounted indoor unit Standard series (ZSP) - Design flexibility optimised with a compatible piping length up to 25 m (size 45/50) and up to 15 m (sizes 25/35) - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating) - Product range available with R32 (-W1) and R410A (-S) refrigerants

VRF wall mounted - Indoor unit (R32) - Stylishly designed with rounded contours that fit beautifully into any of Europe’s diverse interior settings - Flap control system - Powerful air flow design that is proven achieve uniform air conditioning even to the furthest corners of the room

VRF Ceiling suspended - Indoor unit (R32) - Slim and sleek design starting at just 28kgs in weight - Quick, easy & neat installation: refrigerant piping can be routed in three directions (rear, up, right), drain piping in left or right directions, - Flap control system: Selection of flap position is possible. A flap can be set at different angles. - The industry's lowest sound pressure levels were achieved by decreasing air flow volume, decreasing pressure loss with employment of one fan motor and optimizing casing and distributor shape.

RAC Multi system - Outdoor Unit (R32) - High energy efficiency with the use of R32 refrigerant (A+++ in cooling, A++ in heating) - Flexibility of installation with a total pipe length of 30 m and up to 2 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels - Wide range of operation down to -15 degC in heating and up to 46 degC in cooling